What is a Dodge build sheet?

A build sheet is the factory's own record of how one specific vehicle was assembled. For a Dodge it lists every sales code — engine, transmission, axle, paint, packages, and options — tied to the VIN.

It's the most reliable way to confirm how a used Charger, Challenger, or Durango was originally configured — far more dependable than a badge or a listing.

What the build sheet shows

Powertrain, trim, exterior and interior colors, wheels, option packages, and dealer-installed-at-factory equipment — the details that explain why two cars with the same model name can feel completely different.

On performance models it separates the genuine hardware — Scat Pack, SRT, Hellcat equipment — from appearance packages that only look the part.

Sales codes explained

Stellantis / FCA vehicles use 3-character factory sales codes on the build sheet. One package code can bundle several smaller features, so reading the sheet carefully tells you what the car actually carries.

Factory data is the baseline, not proof of current condition — wheels, audio, and trim may have changed since delivery, so use the sheet alongside photos and an inspection.

Can someone help decode my Dodge build sheet?

Build Sheets · 2019 Dodge Charger · 563 views · 3 replies Solved

AHC — Identifies a factory-installed equipment group listed on the build sheet. Browse Sales Code codes →

Mike R. Aug 5, 2025 · Michigan

Just picked up a 2019 Charger R/T and pulled the build sheet for it using the VIN. I was expecting plain English, but instead I got three solid columns of short codes with one-line abbreviations next to them. Some are obvious, like the paint line, but most mean nothing to me. Is there a trick to reading these things top to bottom? I mainly want to confirm the sound system and axle before I start budgeting for mods. Any pointers from folks who have done this would be appreciated.

6 likes

3 replies

Vicki L. Aug 7, 2025

Start at the top block, which is vehicle identity, then the codes run roughly by category: powertrain first, then chassis, then interior, then options. Read the abbreviation next to each code instead of the code itself and it gets much less scary.

0 likes

Dan K. Aug 10, 2025 Accepted answer

The build sheet is grouped, not random. Match each three-character code against the abbreviation printed beside it, and keep a notepad of the ones you care about. For your goals, look for the axle line in the chassis section and the radio line under interior equipment. Ten minutes and you will have your answers.

5 likes

Mike R. Aug 13, 2025

That did it, thanks. Found the axle line right where you said and the premium audio code beside the radio entry. Way easier once I stopped trying to memorize codes and just read the abbreviations.

3 likes

This thread is part of a read-only archive — replies are closed. Register or sign in to follow future discussions.

#mopar
#build-sheet
#charger
#sales-code